# Service source

## Introduction

The **source** tab shows settings for the source connector associated with this service - for example:

<figure><img src="/files/8dywNPn9a9odNRoKeiBM" alt=""><figcaption></figcaption></figure>

## Working with source settings

Settings on this page are summarised below:

| Field            | Summary                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
| ---------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Source system    | The system that is defined as the source for this service (e.g. Shopify). When this service runs, data is pulled from this system.                                                                                                                                                                                                                                                                                                                          |
| Environment      | <p>When a <a href="/pages/nGdgsIG4bbzprkwE8YrF">connector is added</a>, you can choose whether it is to be used in a live environment, or for testing (also known as staging). </p><p></p><p>The environment is set at the connector level and cannot be changed here. If you need to use a different environment than the one specified here, make sure that a connector exists with the required environment setting and add a new service to use it.</p> |
| Page size        | The number of records to be pulled from the source system at a time. Typically, this value should be left as per the default setting.                                                                                                                                                                                                                                                                                                                       |
| Maximum attempts | The number of times that the service will retry pushing a record if it fails to sync for any reason.                                                                                                                                                                                                                                                                                                                                                        |
| Time zone        | Primarily used for time-based filters (e.g. syncing orders created after a given date/time). Patchworks uses UTC but a specific time zone can be applied here if needed.                                                                                                                                                                                                                                                                                    |

{% hint style="info" %}
If you make any changes to these settings, remember to save changes using the **save** button at the bottom of the page.
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.wearepatchworks.com/product-documentation/patchworks-services/working-with-services/the-anatomy-of-a-service/service-source.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.